Vinten Vision 250 Service Manual download pdf (Page 14)

Servicing

Routine maintenance

Replace the balance mechanism digital display battery yearly.

During use, check the following:

Check the effectiveness of the pan and tilt brakes. Reset as necessary.

Check the operation of the balance mechanism digital display and the illumination of the

level bubble and drag knobs. Replace battery if necessary.

No further routine maintenance is required.

Cleaning

During indoor use, the only cleaning required should be a regular wipe over with a lint-free cloth.

Dirt accumulated during storage may be removed using a semi-stiff brush. Particular attention

should be paid to the levelling bowl and mounting face of the head and to the space between the

tilting assembly and the base.

All Vision heads are weatherproof. However, use out-of-doors under adverse conditions will re-

quire special attention. Salt spray should be washed off with fresh water at the earliest opportunity.

Sand and dirt acts as an abrasive and should be removed using a semi-stiff brush or vacuum

cleaner.

NOTE: Use only detergent-based cleaners. DO NOT use solvent- or oil-based cleaners,

abrasives or wire brushes to remove accumulations of dirt, as these damage

the protective surfaces.

Battery replacement

(9)

(16.2)

(16.1)

(16)

BATTERY TYPE

9v, 6LR61 (PP3, 6AM6, MN1604, E-BLOCK)

Vinten Part No. C550-023

1 2 ... 9 10 11 12 13 14 15 16 17 18

No comments

Vinten Vision 250 Service Manual Page 14